View2Plan v{{VERSION}}

Section & Profile to Plan Mapper for Autodesk Civil 3D

View2Plan takes points you click inside a Civil 3D Section View or Profile View and creates them at their true position in plan, with the elevation you picked. Use it to digitise structures, utilities, kerb lines or grading limits straight from your sections and profiles. CIVIL 3D ONLY

How it works

While you pick, View2Plan only draws temporary screen graphics: markers on the view you click in and a live preview of the result in plan. Nothing is written to the drawing until you finish the command. The points and the 3D polyline are then created in one step, so a single UNDO removes the whole run.

Requirements

Where to find it

After installation, restart Civil 3D. Open the Add-ins tab of the ribbon: the panel Plan Projection holds one large View2Plan button and three small buttons next to it. Hover a button to see what it does; press F1 while hovering to open this page at that button. Every button also has a command you can type.

View2Plan
SPPMAPPER
Opens the settings palette: layers, colours, temporary graphics, output mode and the two start buttons.
Section → Plan
GR_S2PL
Starts picking in a Section View, using the saved settings.
Profile → Plan
GR_P2PL
Starts picking in a Profile View, using the saved settings.
Help & AboutOpens this page.

How to use

1
Open the palette and set your outputs
Click View2Plan on the ribbon or type SPPMAPPER. Enter the point layer and the line layer, pick their colours, and choose the operation mode.
2
Start from a view
Click From Section View or From Profile View in the palette (or use the ribbon buttons). Your settings are saved automatically. Select the Section View or Profile View when prompted.
3
Pick points
Click points inside the view grid. Each click shows a marker on the view and the matching position in plan. Type U and press Enter to remove the last point. A click outside the grid, or past the end of the alignment, is ignored with a warning and you can keep picking.
4
Finish
Press Enter or right-click. View2Plan creates the points and the 3D polyline and prints a summary on the command line. Esc also finishes and keeps the points you already picked. To discard a run, use UNDO once.

Settings palette

Layers & Styles
Point Layer, Line Layer
Layers for the created points and the 3D polyline. A layer that does not exist is created with the colour shown in the box next to it (AutoCAD Color Index 1 to 255). A layer that already exists is used as it is and is never changed. Created objects are ByLayer.
Layers & Styles
Temp Points, Temp Line
Appearance of the temporary graphics on the Section or Profile View: Cross, Circle or Node markers, and a Continuous or Dashed tracking line, each with its own colour. Markers are sized to your current zoom.
Layers & Styles
Maintain Temp Geometry till REGEN
When checked, the markers on the view stay visible after the command ends so you can see what you already digitised. They disappear the next time you run REGEN, REDRAW or save that drawing, and when the drawing is closed. They are screen graphics only and are never saved in the drawing.
Mode
Operation Mode
  • Cogo Points + 3D Polyline: Civil 3D COGO points plus a connecting 3D polyline.
  • AutoCAD Points + 3D Polyline: lightweight AutoCAD points plus a connecting 3D polyline.
  • Only Cogo Points: COGO points, no line.
  • Only AutoCAD Points: AutoCAD points, no line.
COGO points are created with the raw description V2P on the point layer. A 3D polyline needs at least two picked points.
Actions
Save Settings
Stores the settings for your Windows user. They are used the next time you start Civil 3D and when you type the commands directly.

Good to know

Troubleshooting

"Cannot locate resource 'themes/colors.xaml'" This error came from version 1.0.0 when another add-in was loaded first. It is fixed in version 1.1.0. Install the current version.
The Plan Projection panel is missing Restart Civil 3D after installing and look on the Add-ins tab. Check that only one copy of View2Plan is installed (Windows Settings, Apps). The panel returns automatically after a workspace switch. If the Add-ins tab itself is hidden, right-click the ribbon and choose Show Tabs, Add-ins. If your workspace has no Add-ins tab, View2Plan shows its own tab named View2Plan instead. The typed commands always work.
No COGO points were created The command line shows how many COGO points failed. Check that the point number settings and point groups of the drawing allow new points.
Something else Errors are written to %TEMP%\View2Plan.log. Send that file with a short description to the address below.
Updating from version 1.0.0: the panel is still on the Add-ins tab, now with separate buttons for sections and profiles. Your saved settings are kept. New COGO points get the raw description V2P instead of GP_NODE; update description keys or point groups that were built on the old text.

New in version {{VERSION}}

About

Beka Tchigladze
Founder & Computational Design Lead, Green Road Group
Visit Green Road Group